Window Installation
in Martin, SC
South Carolina 29836

Vinyl (value/low-maintenance), fiberglass (stiff, stable, paintable), aluminum-clad wood (warm interior + durable exterior), and composite. We compare cost, color options, and energy performance for Martin climate and sun exposure.

Insert keeps existing frame/trim (faster, less demo) if the frame is square and dry. Full-frame removes everything to the rough opening—best when wood is rotten, you want bigger glass, or need new flashing/insulation. We’ll show which fits your 29836 home.

Double-hung (classic, tilt for cleaning), casement (best air seal, catches breezes), sliders, awnings (great for rain-venting), picture/fixed (view & efficiency), hopper (basements), and bay/bow/garden for added space/light. We balance ventilation, egress, and views for South Carolina weather.

Low-E coatings, double or triple pane with argon or krypton gas, warm-edge spacers, insulated frames, and tight installation. We target U-factor and SHGC levels appropriate for South Carolina’s ENERGY STAR® zone and your orientation (south/west sun in Martin).

U-factor = heat loss (lower is better). SHGC = solar gain (lower blocks heat). VT = visible light transmission (higher is brighter). We tune these values by room—e.g., lower SHGC for west-facing windows in Martin.

Yes—laminated glass, reinforced frames, and upgraded hardware. Where code or insurance incentives apply, we provide DP/PG documentation and installation that meets local wind-borne debris standards.

Measure/ordering: 1–3 weeks (brand/finish dependent). Install: often 1–2 days for a typical home. We stage rooms, protect floors, cap exteriors, foam/caulk, and clean up the same day in Martin.

Yes—haul-away is included. We replace rotted sills/brickmold, add aluminum coil capping outside (optional), and install new interior casing/jamb extensions as scoped for your Martin project.

Pan/sill flashing, back dams, proper shingle-style layering with WRB/housewrap, head flashing/drip caps, and weep management. This is critical in South Carolina rain and freeze/thaw cycles.

Air leakage from warped frames, failed weatherstrip, or poor original install. New units with proper air sealing + low-expansion foam dramatically improve comfort and HVAC load in Martin homes.

Yes—factory black, bronze, clay, or custom finishes on many vinyl/fiberglass lines; aluminum-clad wood offers wide palettes. We confirm HOA rules for 29836 neighborhoods.

Absolutely—code-sized units with compliant clear opening, wells, ladders, and drainage. We coordinate permits and inspections per South Carolina requirements.

Ask for laminated glass or STC/OITC-optimized packages, plus tight installation and foam sealing. Bedrooms and home offices near traffic benefit most.

Double suits most homes; triple helps in very cold climates or for noise control. We weigh U-factor gains vs. cost and daylight to ensure ROI for Martin.

Yes—manufacturer glass/frame warranties plus our workmanship warranty. We register serials, provide care guides, and handle service locally in 29836.

Yes—promotional plans for whole-home projects. We can layer incentives (utility rebates, ENERGY STAR® programs where offered in South Carolina) and provide itemized proposals.

We sure do—matching finishes and energy packages. We integrate threshold pan flashing and cap exterior trim to keep water out in Martin’s weather.

Floor runners, furniture coverings, dust control, and clean-room sequencing (room by room). We vacuum, wipe glass, reinstall screens, and test locks so your 29836 home is spotless.

Lower U-factors, warm-edge spacers, and proper humidity control help. Persistent condensation often points to high indoor RH—our team offers ventilation and bath-fan tips for South Carolina winters.

Yes—fin-frame integration for stucco/brick; careful removal of brickmold; backer rod + sealant joints sized for movement; and exterior capping tailored to your facade in Martin.

Tempered or laminated in hazardous locations (near doors, showers, low sills, stairs) and laminated/impact in coastal zones where required. We install to South Carolina residential code.

We set the unit true/plumb and add jamb extensions or drywall returns as desired. Between-the-glass blinds are an option on select lines in Martin.

Yes—surface magnet contacts or integrated sash sensors on compatible brands. We coordinate with your alarm vendor for 29836 homes.

Simple: clean tracks/weep holes, check caulk and weatherstripping annually, wash glass with non-abrasive cleaners. Painted/clad wood may need periodic touch-ups.

Modern finishes resist UV fade; frames are engineered for thermal stability. We’ll discuss heat-build considerations for dark colors in west/south exposures in South Carolina.

Often yes—header/lintel evaluation, structural permitting, insulated seat board, roof tie-in, and exterior support. We create the “nook” look many Martin homeowners love.

Depends on material, glass package, size, count, finish, and install method. You’ll get a line-item proposal with good/better/best options so you can choose the right package for your Martin budget.

Yes—Low-E coatings reduce UV/IR transmission while keeping visible light. We’ll tune VT/SHGC to protect hardwoods and fabrics in sunny Martin rooms.

Book a free measure visit. We confirm goals (noise, energy, color), verify openings, review code/HOA, and schedule install with clear timelines for your 29836 address.